LarMar Industries - Ancillaries

Large image

Brand:
Model:
S/N:
KW:
Price:
Description:

Kato Generator
A267330000
13191-07 Code 6P7-2525 .7 PF
1500kW
$80,000
Synchronous Brushless Revolving Field Generator with a direct connected rotating brushless exciter, with the following specifications: 6-pole, 1200 rpm; 1500kW, 2142.9 kVA @0.7 P.F.,

3 Phase, 60Hz, 346/600 Volts

The generator is Two-Bearing design, with shaft extension and close coupled adaptor. Stand-Off Terminal Connectors, mounted in outlet box, RTD embedded in stator windings for temperature monitoring, PMG, Two-100 ohm RTC's installed in bearing housing for temperature monitoring (1 per bearing) Commercial Space Heater ABS 17,700#
27 hours of test; UNUSED

Ref#NE157

UO456

Larger Image

Brand:
Model:
S/N:
KW:
Price:
Description

General Electric
Generator
GP8419480
1062 KVA- 600V
$27,000
General Electric SCR Generator just off an SCR rig with minimal hours, two bearing, Caterpillar coupling, 1200 RPM. Can be shopped and serviced, call for details.

Ref#UO456

UO455

Larger Image

Brand:
Model:
S/N:
KW:
Price:
Description

General Electric
SCR Generator
HN8414196A
900 KW 600 V
$25,000
GE SCR Generator End, Model 5AT1830954, 1200 RPM, Two Bearing, 600Volt, 60 Hz, CAT coupling, running take out from a CAT Engine with (4000 hours). Unit can be cleaned and serviced, call for details.

Ref#UO455

Larger Image

Brand:
Model:
S/N:
KW:
Price:
Description

CAT
Radiator/Air Exchange Cooler
Amercool
108' Radiator
$12,000
Radiator - 108 Square foot Amercool Vertical Cooler Cooler/Rad. Model 108-STF, dual core, Was cooling tow Natural Gas engines but adjustments can easily be made to convert to your application. Internal Electric motor drive Compact ( Shallow) for its size. Very nice condition

Ref#UO252

Larger Image

Brand:
Model:
S/N:
KW:
Price:
Description

CAT
SR4 (3 avail)
5XA03341
1000
$15,000 each
Generator - CAT SR4, Serial number 5XA03341, Arr#5N5070, 1000 KW, 480V, 4 wire, SAE#00, 1800 RPM, Compatibility- 3500. Recently removed from 3512 with 1100 hours since new (3 available)

Ref#UO252

UO189

Larger Image

Brand:
Model:
KW:
Price:
Description

E M BEMAC
SCR Generator
800KW 600V
$15,000
Reconditioned Generator End for SCR Service, 1000 KVA, 800KW, 1200 RPM, #00 SAE, 347/600V @.7 PF, Single Bearing, unit has been serviced, dipped and baked and ready to go to work.

Ref#UO189

larger image

Brand:
Model:
S/N:
Price:
Description::

Caterpillar
SRCR
500TH3622
$5,500
Generator - 600kw CAT SRCR, 1200 RPM, ARR#8L44, 700 KW STDBY, 240/480V, 10 WIRE, SINGLE BEARING, SAE#00, Compatibility: 398/ G399, VERY GOOD CONDITION, GOOD RUNNING TAKE OFF

Ref# UO173

larger image

Brand:
Model:
Price:
Description:

KATO (3- avail.)

220750000 6P6-1350
$8,000 ea $20,000 for package
Generator - 550KW- KATO MODEL A220750000, CATG 6P61350, 1200RPM, SAE# 00, SINGLE BEARING, 2440/4160V, 6 WIRE, CAT FEET; 550KW @105* RISE, CAME OFF G399SITA, SET OF 3 VERY NICE off of same package

UO158,159,160

larger image

Brand:
Model:
S/N:
Price:
Description:

Lufkin Gear Box
MH127CH
4321
$4,000
Gear End - Lufkin Model MH127CH , Ratio 3.08 to 1, 1200RPM, 860 HP rated, Service factor 1.86, service rating is 1050 hp, Order # 8137-88, Oil Cap 9 Gal.(LUFKIN GEAR END ONLY)

Unit had only 3500 original hours

Ref# UO295

larger image

Brand:
Model:
Price:
Description:

Kuypers Speed Increasers (3 avail)
63070
$2,000 each
Kuypers speed increasers ratio: 1.0 to 1.25 SAE #00. Removals from houred D398s CAT 820 BHP from 1200 rpm to 1500 rpm. Large output shaft with hub.

Ref# UO176; UO177; UO178

larger image

Brand:
Model:
S/N:
Price:
Description:

Cotta
GO1500A
157537
CALL
Gear End - COTTA Speed Reducer ratio 2 to 1,rpm 1800 to 900 RPM SAE#1, from 3406 Model GO1500A, very low time

Ref# UO179

Larger Image

Brand:
Model:
S/N:
Price:
Description

Bingham
8X10X15HSB
20493-2
Call
Pump Package - Bingham Centrifugal 8x10x15 HSB, 3500 GPM, Head 600#, 3560 RPM, Mfg 10/16/98.Very nice

Ref#UO294

larger image

Twin Disc

PTO s

For Sale or Exchange

In Stock

Call, we have what you need

405-615-0528

GENERATOR ENDS

KW	Description	MPN	Brand	Cond.#	Ref #	Status
1500KW	Generator - 1500KW, 1200RPM, 600V, Kato GEN END SCR S/N 13191 CODE C067-7820 MODEL A267330000 KW1500 PH 3 WIRE 6 HZ , KVA 2142.9 , TEMP RISE 80 VOLTAGE 347/600, 27 hrs of test, Unused	$85,000	KATO	10	NE157	READY ONLINE
1000KW	Generator - 1000KW, 1800 RPM, 480V, #00, CAT SR4, Serial number 5XA03341, Arr#5N5070,4 wire, SAE#00, 1800 RPM, Compatibility- 3500. with 1100 hours since new	$15,000	CAT	9.5	UO252	Low Hr Takeoff-READY
1000KW	Generator - 1000KW, 1800RPM, 4160V, #00, Marathon Magna-One, model 682FDR8250GG, Frame 682, 60 Hz, 3 PH, .8 PF, 2400/4160, 1800RPM 300 TOTAL HOURS	$9,000	MARATHON	8	UO365	READY ONLINE
1000KW	Generator - 1000KW, 1800RPM, 480V, #00, CAT SR4, Serial number 5XA03340, Arr#5N5070, 480V, 4 wire compatibility- 3500. with 1100 hours since new	$15,000	CAT	10	UO253	READY ONLINE
1000KW	Generator - 1000KW, 1800RPM, 480V, #00, CAT SR4, Serial number 5XA03341, Arr#5N5070, 4 wire, Compatibility- 3500. Came off 3512 with 1100 hours since new	$15,000	CAT	10	UO255	READY ONLINE

900KW	Generator - 900KW, 1200RPM, 460V, #00, CAT SRCR Generator CAT PART # 8L91, SINGLE BRG, 10 WIRE, CAT FEET, STANDOFF BOX W/O BREAKER, NEEDS CLEANING BUT IN GOOD CONDITION AS IS	$5,500	CAT	6	UO200	running Take off
800KW	Generator CAT SR4 - 800KW, 1800RPM, 240/480V, #00, Cat SR4, serial number 5UA02437, Arr#203-2700, 681 frame, 240/480V, EMCP2,Running Take-Off	$8,500	CAT	7	UO374	running take off
800KW	Generator - 800KW Prime, 1200RPM, 240/480V, #00, CAT SRCR single brg, 60 hz. ARRG # 5N0620, 807 frame, 399 take off, missing VR, side door, AS IS	$6,000	CAT	5	UO275	READY ONLINE
800KW	Generator - 800KW, 1200RPM, 347/600V SCR,#00 Bemac III 1000 KVA 1200 RPM, 600 volt, Dipped and Baked, Ready	$15,000	BEMAC	9	UO189	Refurb.- READY
800KW	Generator - 800KW @1200 RPM, 60HZ, 105 degree rise, 2400/4160 voltage, Kato 6P6-1925, SAE #00, as is	$9,000	KATO	5	UO419	running take off, but needs cleaning
800KW	Generator - 800KW @1200RPM, 60 HZ, 105 degree rise 2400/4160 voltage, Kato 6P6-1925, SAE #00, as is	$9,000	KATO	6	UO418	running take off, but needs cleaning
800KW	Generator - 800 KW @ 1200 RPM, 60 HZ, 105 degree rise, 2400/4160 voltage, Kato 6P6-1925, SAE #00, as is	$9,000	KATO	6	UO420	running take off, but needs cleaning
700KW	Generator - 700KW, 1200RPM, 480V, #00, CAT SRCR, ARR#8L44, 700 KW STDBY, 600KW Prime, 240/480V, 10 WIRE, SINGLE BEARING, COMP 398/ G399, GOOD RUNNING TAKE OFF AS IS	$7,500	CAT	7	UO173	Runner-
700KW	Generator - 700KW, 1800RPM, 480V, #00, Cat SR4 650kw prime, 50Hz, 1500 RPM, 10 wire, Gen SN# 6NA01679, Arr# 7C1622.	$10,000	CAT	8	UO360	Runner- Needs Cleaning
620KW	Generator - 620KW, 1800 RPM, 347/600V, Kato 6p4-2150, Two Bearing	$15,000	KATO	8	UO397	good runner

600KW	Generator - 600KW Standby, SR4,1800 RPM, 480 volt, 10 wire, 60 hz	$9,000	CAT	8	UO410	Good Runner
565KW	Generator - 565KW, 1800RPM, 240/480V, #0, CAT CAT SRCR #8L41, 685 FRAME, VERY LITTLE USE, LOOKS NEARLY NEW OFF D348 BUT WILL WORK ON 3412, low houred takeoff-READY	$9800	CAT	10	UO138	READY ONLINE
550KW	Generator - 550KW, 1200RPM, 4160V, #00, KATO MODEL A220750000, CAT#6P6-1350, SINGLE BEARING, 2440/4160V 6 WIRE, CAT FEET 550KW @105* RISE, CAME OFF G399SITA, SET OF 3 VERY NICE, NEEDS TO BE CLEANED only 6P61350	$8,000	KATO	8	UO158	VG Runner- Cleaning Required
550KW	Generator - 550KW, 1200RPM, 4160V, #00, KATO MODEL A220750000, CATG 6P6-1350, SINGLE BEARING, 2440/4160V 6 WIRE, CAT FEET 550KW @105* RISE, CAME OFF G399SITA, SET OF 3 VERY NICE, NEEDS TO BE CLEANED only	$8,000	KATO	8	UO160	VG Runner- Cleaning Required
550KW	Generator - 550KW, 1200RPM, 4160V, #00, KATO MODEL A220750000, CATG 6P6-1350, SINGLE BEARING, 2440/4160V 6 WIRE, CAT FEET 550KW @105* RISE, CAME OFF G399SITA, SET OF 3 VERY NICE, NEEDS TO BE CLEANED only	$8,000	KATO	7	UO159	VG Runner- Cleaning Required
545KW	Generator - 545KW, 1800 RPM, Arr. 9Y3877, Cat SR4, 105 Heat Rise, 240/480 Volt, 1200 Amp Circuit Breaker, Digital EMCP panel, 60 HZ, 5000 hours	$9,500	CAT	9	UO407	READY ONLINE
545KW	Generator - 600KW, 1800RPM, 240/480V, #0, CAT SR4 off 3412, arr#5N8670, running take off 5N5026, 681 KVA, 545KW, 480 volt, 819 Amp. EMCP, LOOKS UNUSED	$9,500	CAT	9	UO371	READY ON LINE

500KW	Generator - 500KW, 1800RPM, 240/480V, #0, Kato Model 500SR9E,g for D3412 or equal, has 1100 original hrs	$9,000	KATO	10	UO385	less than 350 hrs
500KW	Generator - 500KW, 1800RPM, 240/480V, #0, Katolight ,model D500FPX4, single Bearing,looks unused.	$8500	KATO	10	UO353	READY ONLINE
500KW	Generator - 500KW, 1800RPM, 480V, #0, Kato 500 SR9E SN#69534-1, 60HZ, 4 Wire, brushless, 752 Amps, .8pf	$9,000	KATO	10	UO387	READY ONLINE
400KW	Generator - 400 KW SRCR 8L91 CAT, AS IS	$4000	CAT	6	UO139	OPERABLE
400KW	Generator - 400KW, 1800RPM, 480V, #0( 2Brg), MARATHON Magna Generator MODEL 502EDR3183GGW, TYPE FDR, 2 BEARING, 277/480V, HAS COUPLING HUB WITH 17" CENTERLINE, LIKE NEW	$6,000	MARATHON	9	UO194	READY ONLINE
350KW	Generator - 350KW, 1200RPM, 240/480V, #0, KATO Brushless- 320kw Cat#6P4-1550, 4 wire, 60Hz, 277/480 volt, 1200 RPM, 320kw Cont. 352kw Standby. Will fit 3412 or 353. Came off of UC747, 81 houred engine, No Standoff Kit	$7,000	KATO	9	UO380	Low Hr Takeoff-READY

320/400KW	Generator - 320/400KW, 1200RPM, 480V, #00, CAT SRCR 280kw @50HZ, 330 KW @60HZ, 1000/1200RPM, 683 FR, PT 8L38, GOOD RUNNING TAKE OFF G379TA- Great Take OFF	$5,000	CAT	6	UO148	Run take out but been setting

180KW	Generator - 180KW, 1800RPM, 480V, #1, CAT SR4 GEN model#4W7434 SN#6JA03544, 60HZ, 240/480V, was UC155- Unused	$3500	CAT	9	UO296	READY ONLINE
160KW	Generator - 160KW, 1800RPM, 480V, #1, - CAT SR4 GEN Model#4w0184 SN#6JA03485, 60HZ, 3208- Unused	$3,000	CAT	10	UO297	Unused-Ready
150KW	Generator - 150KW, 1800RPM, 480V, #1, LIMA GEN SN#BC32874FD, 150KW, 60HZ, 1800RPM, 480/220V, Dipped, ready	$2,500	LIMA	9	UO150	Refurbished.- READY
150KW	Generator - 150KW, 1800RPM, 240/480V, #1/2, CAT SR4 , 1800 rpm, sae 2, single, 240/480 unused, arr # 4W8954for 3208, unused	$3,000	CAT	10	UO266	Unused- Ready
150KW	Generator - 150KW, 1800RPM, 240/480V, #2, CAT SR4 GEN Model#4W8954 SN#9BB01140, 60HZ, 3208, Unused	$2,000	CAT	10	UO298	Unused- Ready
80KW	Generator - 80KW, 1800RPM, 480V, #1, STAMFORD BRUSHLESS MODEL SC244E, 1800 RPM, SAE#1, 415/480V, 4 WIRE, LOOKS UNUSED.	$1,000	STAMFORD	10	UO268	Ready

Don’t see what you need? Please call (432) 561-8700, this is only a partial listing of our inventory and we purchase daily. Send us your requirements and we will do our best to meet your expectations.